Samsung Sprint User Manual page 192

To turn Wi-Fi off:
1.
Press
>
Wireless & networks > Wi-Fi
2. Tap to remove the green checkmark and
deactivate Wi-Fi.
– or –
1.
Touch and hold the Status bar, and then slide your
finger down the screen.
2.
Tap the onscreen Wi-Fi icon to turn off the Wi-Fi
service (turns gray when disabled).
Note:
Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
To connect to a Wi-Fi network:
1.
Press
>
Wireless & networks > Wi-Fi settings.
The network names and security settings (Open
network or Secured with xxx) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
178 3B. Web and Data Services
and tap
>
.
and tap
>
Note:
When you select an open network, you will be
automatically connected to the network.
2. To manually add your new network connection:
Touch
Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wi-Fi network.
Tap the field and select a security option.
Security
This must match the current security setting on
your target network.
If secured, you will also need to enter the wireless
password. The
show password
password as you type it instead of showing only
asterisks (****).
Tap to store the new information and
Save
connect to the Wi-Fi network.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1.
Press >
Wireless & networks > Wi-Fi settings.
.
option, reveals the
and tap >