Daewoo DTC-20 Manual Instruction page 12

EQUALIZER MENU
- Select the equalizer band by use of the C / B buttons.
- Adjust the level of each of the 5 equalizer bands, 100Hz, 300Hz, 1000Hz,
3000Hz, 8000Hz, by use of the PR y / x buttons.
- The above modified values are automatically stored in FAVOURITE
mode.
- The OK button will select the picture presets NORMAL,SPEECH, MUSIC,
FAVOURITE. The currently selected preset is displayed in the menu
header.
- The FAVOURITE preset always contains the settings that you last
entered.
- You can also select the sound presets by using remote control MODE
button.
NORMAL
- In case of the models that have 'RF Stereo' function, the operation procedure of MODE button
is as below.(OPTION)
Mono forcing, dual language
- If you are unable to get good sound quality for a program due to poor reception, you can force a
change from stereo to mono transmission by pressing the remote control MODE button. Then the
program status display will indicate "MONO" with a
- On the other hand, during a program with dual language transmission, the MODE button allows
you to toggle between the first and second language. The program status display will indicate
"DUAL 1" or "DUAL 2" (plus NICAM according to the received signal).
- To return to initial state, press again the MODE button.
SOUND EFFECTS
- A SPATIAL sound effect is available, using remote control 3D button.
The following display appears :
SPATIAL
NORMAL
- - - - : - -
- To return to initial sound effect, press again the 3D button.
OFF
NORMAL
- - - - : - -
SPEECH MUSIC
Spatial sound effect
No sound effect
FAVOURITE
icon.
11
EQUALIZER NORMAL
100 300 1K 3K 8K
Adjust Position
MENU Exit OK Preset