Daewoo DTG-28 Manual Instruction page 19

SYSTEM
This is used to switch the SYSTEM of the TV set.
Press the SYSTEM button, then the SYSTEM will be
displayed as shown in the right figure. The SYSTEM
consist of COLOR and SOUND.
At first, the SYSTEM is preset to COLOR: AUTO, SOUND:
B/G at the factory.
If you want another SYSTEM, place the cursor at the COLOR or SOUND by
using DOWN/UP button and press LEFT/RIGHT button. Whenever you press
this SYSTEM button, COLOR SYSTEM is changed as follow:
AUTO PAL SECAM NTSC 4.43 NTSC 3.58 AUTO
and SOUND SYSTEM is changed as follow:
B/G I D/K M B/G
If you get No color or Noise SOUND from this TV set, it is necessary to check
current COLOR and SOUND SYSTEM.
TV ( ) & AV (
In order to change from TV mode to AV mode, press AV (
remote control unit or TV/AV SELECTION button (
the receiver. At this time, the AV(VIDEO 1 or VIDEO 2) is displayed on the
upper right side of the screen.
In case of changing from AV mode to TV mode, press TV
( ) button on the remote control unit or TV/AV select
button ( /
In AV mode, the main MENU is displayed as follow picture.
MUTE( )
Pushing this button cuts off the sound reproduced from the speaker and then
" " will be displayed on the screen with red colour. To return the sound, press
it again.
)
) on the front of the receiver.
/
18
SYSTEM
COLOR: AUTO
B SOUND: B/G
) button on the
) on the front of
MENU
B PICTURE
SOUND
TIMER
LANGUAGE