Table of Contents
Advertisement
Hardware Installation Guide (Mouse)
Step 1. Take out the receiver and Inserting the Batteries
1. Open the top cover as follow
2. A small in front of the mouse button case. Push it and open the top case.
3. Take the receiver out and put 2 AAA batteries in correct place.
4. Close the top cover.
Step 2. Synchronize the RF Mouse (Pairing)
If the mouse is in sleep mode click the mouse button once to wake it up.
1. Plug the receiver into the notebook/ Computer's USB ports or into the USB
HUB/ keyboard's USB port.
2. Bring the mouse within 1 ft range from the receiver
3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to
click the "CONNECT" button (ID button) once.
NOTE: Do Not depress the CONNECT button longer then 1.5 seconds. The LED
will go off when the "CONNECT" button is pressed down. (You just
power off the mouse)
* Poke the Mouse Connect button first, and then click the receiver's button!
Restorable Optical Wireless Mouse
Page 4 of 11
2.2 Edition
Advertisement
Table of Contents
