Heath 595-5684-08 User Manual page 3

Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
• Ding (one note tune)
Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push Button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Push Button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recommend
the back door use the Ding tune and the front door use the Ding-Dong tune
(or Westminster tune, available on selected chimes). Models that include two
push buttons will come factory set for front and back doors. Decals on the rear
of the push button will indicate its setting.
Remove screw to
open access door
595-5684-08
Tune Settings
Install an alkaline type A23 12 Volt
battery. The positive terminal should be
positioned as shown.
Back of
Chime
Tune Setting
(Not used on
all models)
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Push Button Battery Replacement
Inside Push
Button
-3-
* Code Settings 1-7
Must Match Both
Push Button and
Chime
Tune Setting