4.
Use the ▲ or ▼ buttons to select your connection type between AIR (antenna)
or CABLE and press ↵ to scan for channels.
5.
Once the scanning finishes, you can begin to watch TV.
Please Note:
•
AUTO mode only works when there is an antenna attached to
the TV. Cable signals are not compatible with this mode.
•
The time setting on the TV will only keep accurate time if you
do not unplug or turn off standby power from the TV.
•
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
•
The HDTV's tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that signal
level with your antenna or cable, your HDTV might lose picture or
sound.
SCEPTRE E32 LED HDTV User Manual
- 26 -
www.SCEPTRE.com