White 1010 Instruction Manual page 43

Oiling
Use oil manufactured specially
for sewing machine use. Other
oils will eventually
cause
mechanism to jam.
Apply one drop of oil to part of
hook where friction occurs.
Open face cover and apply oil in
the same way.
Be careful not to apply too much
oil or it may stain your material
and cause some sewing difficulty.
After oiling, run machine for 1 -2
minutes to allow oil to penetrate
to every part.
Remove top cover by loosening
screws
:;
and
with large
screwdriver.
pply
one drop
of oil to
lubricating points indicated by arrows.
—40—