Kodak EasyShare 5500 User Manual page 26

Chapter 2
Press until Scene Balance is selected.
4
Press or to enable or disable Scene Balance.
5
Press OK.
6
Add Date to Prints
You can set your AiO printer to print the date a picture was taken on the photo print. The default is to not
print the date.
Press Menu to display the main menu.
1
Press to select Photo Print Settings.
2
Press OK.
3
Press until Add Date to Prints is selected.
4
Press or to enable or disable date printing.
5
Press OK.
6
Button Sounds
You can configure your AiO printer to emit an audio feedback beep when you press a button on the control
panel. The default setting is to beep.
Press Menu to display the main menu.
1
Press until Control Panel Settings is selected.
2
Press OK.
3
Press or to enable or disable button sounds.
4
Press OK.
5
Minutes to standby
When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the
Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby
state, any activity such as a single button press or inserting a memory card brings the AiO printer out of
the Standby state and returns it to the Ready state.
NOTE: Faxes and print jobs from wireless devices (included PCs linked over the WLAN) can be received
while in standby.
You can set the standby timeout from 10 – 30 minutes. The default setting is 30 minutes.
Press Menu to display the main menu.
1
Press until Control Panel Settings is selected.
2
Press OK. The Power Settings menu is displayed with Minutes to Standby selected.
3
Press or to change the standby timeout period.
4
Press OK.
5
22 Kodak EasyShare 5500 AiO