SAFETY PRECAUTIONS Power-supply cords should be routed so that they are not likely to be walked on or nagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. When the power cord or plug is damaged or frayed, unplug the TV from the wall outlet and refer servicing to your authorized dealer.
CONTROL PANEL BUTTONS 1. Power Button 2. Power Indicator & Remote Sensor 3. Speakers 4. Standby Button 5. AV/TV Button 6. Menu Button 7. Volume Down/Up Button 8. Channel Down /Up Button 9. Video In2(Option) AV Out(Option) YUV(Y,Cb,Cr)In (Option) S-Video In (Option) Antenna Input Socket (75 ohm) 10.
Page 5
Connecting the Aerial(or Cable Television Network) To view television channels correctly ,a signal must be received by the set from one of the following sources: *An outdoor aerial *A cable television network Plug the aerial or cable network input cable to the 75 coaxial socket on the rear of the 75 ANT television.
Page 6
Connecting to the Audio/Video Input/Outputs YUV IN AV IN 2 AV OUT VIDEO VIDEO LEFT LEFT 75 ANT S-VIDEO RIGHT RIGHT Cable Television Network AV IN 2 VIDEO LEFT Decoder/ RIGHT video game device LEFT Video disc player S-VIDEO RIGHT Camcorder YUV IN LEFT...
PERIPHERAL EQUIPMENT CONNECTIONS There is a wide range of audio and video equipment that can be connected to your TV. Connection diagrams at the end of this section show you where the different equipment should be connected at the backside of the TV. Aerial socket 1.
USING THE REMOTE CONTROL Batteries Please follow the below instructions to install the supplied batteries into the remote control to make it operate. 1. Remove the battery cover. 2. Insert two 1.5V (AAA size) batteries making sure The polarity (+ or -) of the batteries matches the polarity marks inside the unit.
REMOTE CONTROL BUTTONS Mute Button Power Button (Standby) Digit Buttons Channel AV/TV Button -/-- AV/TV Selection Button Channel up/down Buttons CH.+ Volume up/down Buttons VOL.- MENU VOL.+ CH.- Personal Presets Button Menu Button RECALL Display Button SYS. Recall Button MTS Button Sleep Timer System Button Button...
Page 10
Remote Control Buttons 1.POWER (STANDBY) BUTTON ( Press this button to turn the TV on/off. 2.MUTE BUTTON ( Press this button to temporarily cut off the sound output, press it again to restore the sound level. 3.DIGIT BUTTONS (0-9) If you want to select 0~99 program channel ,please press the digits buttons to enter the program channel directly.
9. PERSONAL PRESETS BUTTON (P.P.) You can select USER, STANDARD, SOFT or RICH mode by pressing this button. 10.RECALL BUTTON (RECALL) Press this button to return to the previously viewed channel. 11. DISPLAY BUTTON ( Press this button sequentially to display the current channel number on the screen.
MENU SYSTEM This TV allows you to adjust the settings from the menu screens. * In the AV mode, menus appear the same as in TV mode except the install menu. BRIGHT Picture CONTRAST COLOR SHARP TINT CORING BLACK STRETCH VOLUME Audio TREBLE...
Turn the TV set on, then power indicator will light up. Press the program up or down button on the TV set,or press the on/off button on the remote control.The picture will appear after a few seconds . (If tuned on) The program number is displayed on the top right-hand corner of the screen. MENU BUTTON 1.Press this button to select menu.
Page 14
Option menu 1. LANGUAGE You can change language menu in this item. OPTION LANGUAGE ENGLISH 2. CALENDAR(option) CALENDAR GAME (1).Press VOL.+/- Buttons to enter into CALENDAR menu. LOTTERY (2).Press PROG.+/- buttons to adjust Year, and press VOL.+/- Buttons to BIOLOGY CLOCK adjust Month.
Page 15
Game 3: Russia Diamonds(Option) Game Rules: Your goal is to clear the screen by fitting in the different sizes of blocks to a row horizontal aligned. One point will be received when one row is cleared. If two rows to be cleared at one time, you can get three points, while three rows cleared, seven points will be received.
Page 16
Clock menu 1. TIME You can adjust the currently time by this item. Press the VOL+button set hour , and the VOL-button set minute . CLOCK 2.ON-TIME _ _:_ _ TIME _ _:_ _ ON-TIME Set the time when the TV set turn on . _ _:_ _ OFF-TIME _ _:_ _...
TROUBLESHOOTING The following problems do not always indicate a hardware failure. Therefore, please use the troubleshooting guide below before calling for repair service. If, after following the guide none of the remedies work, unplug the TV and call for service. Problem Checks and Adjustments TV will not turn on...
Page 18
Remote Control does not operate Check for any obstacle between the remote control and the remote control sensor window. Maybe batteries are dead. Try replacing batteries with new ones. Check for incorrect battery orientation. The picture is doubled or tripled Please change the direction, height or (GHOST) positionof the antenna.
Need help?
Do you have a question about the SL2910PB and is the answer not in the manual?
Questions and answers