Hitachi RAC-S19CE Instruction Manual page 15

2
Set the
(TIME) button.
AM
PM
2
Set the turn-off time with the
TIMER control button.
PM
2
Set the turn-on time with the
TIMER control button.
4
Set the turn-on time with the
TIMER control button.
PM
AM
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
G
the current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press
G
the (RESERVE) button in order to use the same settings next time.
3
Set the current time with the
TIMER control button.
PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and
press the
The (OFF) mark starts lighting instead of flashing and the sign
lights. A beep occurs and the
3
Point the signal window of the remote controller toward the indoor unit, and
press the
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
AM
5
Point the signal window of the remote controller toward the indoor unit, and
press the
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
4
Press the
The time indication starts lighting
instead of flashing.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
PM
The setting of turn-off time is now complete.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on, early so that the preset temperature
AM
be almost reached at 7:00 a.m.
The setting of the turn-on time is now complete.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
Example:
PM
For heating, the device will turn off at 10:30p.m., and then
turn on early so that the preset temperature be almost reached
AM
at 7.00a.m.; for cooling and dehumidifying, it will simply turned
on at 7.00a.m. The settings of the turn on/off times are now
complete.
– 15 –
(TIME) button again.
G
The time indication will disappear
automatically in 1 second.
PM
G
To check the current time setting,
press the
The setting of the current time is
now complete.
Example: The device will turn off at 11:00p.m.
(RESERVED) sign
(RESERVED) sign
(TIME) button twice.
(RESERVED)