LG 55LM6200 Service Manual page 14

4.8. 3D function test
(Pattern Generator MSHG-600, MSPG-6100[Support HDMI1.4])
* HDMI mode No. 872 , pattern No.83
(1) Please input 3D test pattern like below.
(2) When 3D OSD appear automatically, then select OK key.
(3) Don't wear a 3D Glasses, check the picture like below.
4.9. Wi-Fi Test
Step 1) Turn on TV.
Step 2) Select Network Connection option in Network Menu.
Step 3) Select Start Connection button in Network Connection.
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Step 4) If the system finds any AP like blow PIC, it is working
well.
4.10. Magic Motion Remote control test
(1) Equipment : RF Remote control for test, IR-KEY-Code
Remote control for test
(2) You must confirm the battery power of RF-Remote control
before test(recommend that change the battery per every lot)
(3) Sequence (test)
1) if you select the "Start(OK)" key on the Adjustment
remote control, you can pairing with the TV SET.
2) You can check the cursor on the TV Screen, when select
the "OK" key on the Adjustment remote control.
3) You must remove the pairing with the TV Set by select
"OK" key + "Mute" key on the Adjustment remote control.
4.11. Outgoing condition Configuration
■ When pressing IN-STOP key by Service remote control, Red
LED are blinked alternatively. And then automatically turn off.
(Must not AC power OFF during blinking)
- 14 -
LGE Internal Use Only