ZyXEL Communications P-2812HNU-51c Quick Start Manual page 8

• PIN Configuration - create a secure wireless network by entering
your wireless device's PIN (Personal Identification Number) into the
configuration screen of the P-2812HNU-51c. See your User's
Guide for more information.
You must use the same method on the P-2812HNU-51c and the wireless
client.
If no wireless security is enabled on the P-2812HNU-51c, the P-
2812HNU-51c automatically changes to use WPA-PSK/WPA2-PSK
mixed mode and generates a pre-shared key when you use WPS.
Push Button Configuration
1. Place a WPS-enabled device that is installed in your system and
supports the WPS Push Button method within range of the P-
2812HNU-51c.
2. Press the WPS button on the P-2812HNU-
51c's rear panel for five seconds.
3. Use the WPS-enabled device's WPS button. It
can be either a button in the utility or a physical
button. See the device's documentation if you
cannot locate the WPS button. It doesn't
matter which button is pressed first. You must
press the second button within two minutes of
pressing the first one.
4. The P-2812HNU-51c and the wireless device establish a secure
connection. This can take up to two minutes.
5. Congratulations! Your computer is now ready to connect to the
Internet wirelessly through your P-2812HNU-51c.
8