Setup Menu - Technika LCD19-208E User Manual

SETUP MENU

To access this menu, press [MENU] button on the remote control.
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing
First Time Installation
both Freeview and analogue
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs
Auto
Automatically displays the best picture format. So the
picture is in the correct position. May have black lines
At the top/bottom and/or sides.
Full
Zoom
Blue Screen - Changes the background when there is no input between clear and a blue background (Only
available on some sources)
Reset to default
Reset Menu System
Reset TV Channels
Firmware Upgrade
the television (available to download). This menu lets you install the new software/fi rmware onto the
television. Further details of how to do this will be issued with the fi rmware. Contact the helpline or refer
to the 'product support' section of the website.
20
- Takes you back to the fi rst time installation screen, so you can completely re-tune
Fills the screen,
so no black
lines
The picture
is the correct
proportion but
zoomed in to
fi ll the screen
- This resets the menus to factory settings.
- This clears all the TV channels from the television.
- From time to time we may release new fi rmware to improve the operation of
TV Menu Operations
AV
4:3
16:9
14:9
buttons.
Displays the 4:3
picture in its
original size.
Side bars are
shown to fi ll the
16:10 screen
Top and
bottom bars
are shown to
fi ll the 16:10
screen. 4:3
pictures will be
stretched
Displays the
14:9 picture
in the correct
proportion. As
a result side
bars are shown
on the screen