. YU2 is a remarkably flexible computer speaker system that can accept two input sources and connect to a subwoofer for enhanced low frequency effect (LFE) .
Front & Rear Panels FRONT PANEL 3/4” Silk Dome Tweeter 3” Kevlar Mid/Woofer Driver REAR PANEL ON/OFF Switch and Volume Control Right Channel Output Terminals (+ and −) for Passive Speaker Connection 3 .5mm Stereo Mini-Jack AUX USB Audio Input Connector Subwoofer Output DC Input Connection 10 Bass Reflex Port...
When the volume is high, this system can produce noise levels that could permanently damage your hearing. YU2 is a self-powered speaker system. Do not connect the speaker terminals to the speaker outputs of a stereo amplifier. Damage may occur. Use only the power supply provided with the speakers.
- that is, audio signals are output to the YU2 speakers and not to your computer’s internal speakers . For detailed instructions on how to configure the computer settings, please visit Support at www .kantoliving .com...
Connecting a Subwoofer YU2 is equipped with an RCA connector to provide output signal to a powered subwoofer . Simply connect a single RCA subwoofer cable from the SUB OUT connection on YU2 to the AUDIO INPUT on your subwoofer . If your sub-woofer has a stereo L/R RCA input, either left or right inputs will work .
The information in the owner’s manual has been carefully checked and is believed to be accurate . However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual . In no event will Kanto, be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages .