Download Print this page

Bushnell ImageView 111545 User Manual page 17

Digital spotting scope, 5mp camera with 22x magnification
Hide thumbs Also See for ImageView 111545:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
tWo-Year liMiteD WaRRantY
Your Bushnell
product is warranted to be free of defects in materials and workmanship for two years
®
after the date of purchase. in the event of a defect under this warranty, we will, at our option, repair
or replace the product, provided that you return the product postage prepaid. this warranty does
not cover damages caused by misuse, improper handling, installation, or maintenance provided by
someone other than a Bushnell Authorized Service Department.
Any return made under this warranty must be accompanied by the items listed below:
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Date Purchased
5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit,
with return postage prepaid to the address listed below:
in u.s.a. send to:
Bushnell Outdoor Products
Attn.: Repairs
9200 Cody
Overland Park, Kansas 66214
For products purchased outside the United States or Canada please contact your local dealer for
applicable warranty information. in Europe you may also contact Bushnell at:
this warranty gives you specific legal rights.
You may have other rights which vary from country to country.
©2012 Bushnell Outdoor Products
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Mac and Mac OS are trademarks of Apple inc., registered in the U.S. and other countries.
in Canada send to:
Bushnell Outdoor Products
Attn.: Repairs
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
Bushnell Germany GmbH
European Service Centre
Mathias-Brüggen-Str. 80
D-50827 Köln
GERMANY
tel: +49 221 995568-0
Fax: +49 221 995568-20
Fcc compliance statement:
this equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. these limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
this equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/tV technician for help.
the device does not contain any user-serviceable parts. Repairs should only
be made by an Authorized Bushnell repair center. Unauthorized repairs or
modifications could result in permanent damage to the equipment, and will void
your warranty and your authority to operate this device under Part 15 regulations.
the shielded interface cable which is provided must be used with the equipment
in order to comply with the limits for a digital device pursuant to Subpart B of Part
15 of FCC Rules.
Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
17

Advertisement

loading