DOUBLE HEIGHT (1AH)
GRAPHICS (1BH,n)
Document No : DS8078
Prints the line in double height for one line only. Double height
and single height cannot be mixed on the same line.
Graphics command to enter bit image printing. The number of
graphic bytes sent will depend on the type of printer. (eg 24 for
a 1012, 40 for a 1014.) For each graphic byte sent, 6 bits out of
8 are used to build the graphics string (LSB as the right most
dot) and 'n' is the number of times the string sent will be
repeated for a repetitive pattern. The value of 'n' is limited to a
maximum of 63 lines. The print buffer will be printed first if
not empty.
Examples:
To repeat a string of data bytes, d1....d24 over two rows with
a 1012 printer, send : 1BH, 02H, d1....d24.
For a non-repeated string send : 1BH, 01H, d1....d24.
Issue : J
Page 21