Picture Menu - Technika LCD 40 - 270 User Manual

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control. To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Picture Mode
- Choose from the following presets
Standard Default settings
Dynamic Recommended settings for fast moving pictures
Mild Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Ecohome 15% less power consumption
Contrast - Switch the balance between black and white
Brightness - Increase or decrease the brightness of the picture
Colour - Increases the colour from black and white
Tint - Lets you increase or decrease the level of tint within the picture
Sharpness - Increase or decrease the sharpness of the picture
Colour Temperature
Normal Default settings
Warm Increases red within the picture
Cool Increases blue within the picture
Noise Reduction
- Choose from the following presets
Off Turns noise reduction off
Low Minor system adjustment
Middle Medium system adjustments
High Maximum system adjustments
Default Default settings
Tip: If you do not press any buttons for 10 seconds, the menu will automatically exit. You can change the
length of time before the menu exits automatically - see 'Menu Duration' section.
User Guide - Technika - LCD 40-270.indd Sec1:17 User Guide - Technika - LCD 40-270.indd Sec1:17
- Choose from the following presets
AV
buttons.
17 17
12-May-11 1:56:10 PM 12-May-11 1:56:10 PM