HEAT PUMP AND TANK ASSEMBLY
17.
Cable Tab: Remove the tab on the side of the electrical entry to the heat pump module to accommodate
the electrical conduit.
Pliers or tin snips may be required to remove the tab.
remove the tab on the side of the electrical entry to the heat pump module
Studs: Retrieve the three (3) studs from the kit and screw into the three (3) threaded inserts on the side
18.
of the tank closest to the wall.
These studs will assist in aligning the heat pump module for connection to the storage tank.
Step 17
Step 18
screw in studs into threaded inserts
32