LENCO IPD-4100/2 Series User Manual page 14

Problem
Radio sound distorted.
No radio sound.
The iPod will not play
No iPod sound.
If none of the above solves your problem, perform a reset as described on page 11.
Model Number
Power Supply
Power Consumption
Power Output
Radio Frequency Coverage
Dimensions
IMPORTANT: Due to continual revision and improvements to our products design,
specifications are subject to change without notice.
Possible Cause
1.The station is not tuned in.
2.There is a poor signal in the
area.
1.The Speaker Dock is not in
tuner mode.
2.The volume has been muted
or is on the minimum setting.
1.The Speaker Dock is not in
iPod mode.
2.The iPod is not connected
correctly.
1.The Speaker Dock is not in
iPod mode.
2.The volume has been muted
or is on the minimum setting.
• IPD-4100/2
• AC 110-240V 50Hz
• 40 W
• 10W x 2 + 20 W (Subwoofer)
• FM: 87.5MHz - 108 MHz
• 402mm (L) x 265mm (W) x 140mm (H)
13
What to do
1.Fine tune the station.
2.Reposition the
Dock.
1.Press the MODE button until
Tuner is selected.
2. Adjust the volume level.
1.Press the MODE button until
iPod is selected.
2.Reconnect the iPod.
1.Press the MODE button until
iPod is selected.
2.Adjust the volume level.
Speaker