Advertisement
Use
5
Fill the kettle with the required amount of
water.
You can fill the kettle through the spout to keep
the filter in good condition.
At the very least, cover the heating element
(or the bottom of the kettle) with water.
• Never fill the kettle when it is on its base.
• Do not fill it above the max. level or below
the min. level. If the kettle is overfilled,
boiling water may escape.
• Do not use without water.
• Check that the lid is closed properly to avoid
steam near the handle.
6
Place the kettle on its base.
Connect to the mains.
Check that the electrical supply is compatible
with the power and voltage indicated beneath
your model.
• Only plug the kettle into a socket with a built-in
earth connection.
• Never lift the lid whilst the water is boiling.
7
Turn it on using the switch or the trigger
handle. The kettle will turn itself off
automatically when the water is boiling.
Kettles with a metallic body: do not touch the
kettle body when the kettle is switched on and in
use; when the water is boiling and just after use
8
Check that the kettle has stopped
automatically or turn it off manually before
removing it from the base to pour the water.
The first two or three times that you use the
kettle, throw the water away because it may
contain foreign particles.
Rinse the kettle and filter separately.
• We recommend that you do not leave any water
in the kettle after use
Advertisement
