3.7 Indicator Status
Operating status of LED and Sound indicator is shown as below.
a) Scanner
b) Receiver
3.8 Environment Requirement
Software
Operation System:win 98 / 2000 / XP / Vista
Hardware
I. Interface: RS232, KBW, USB
II. Power Supply: 5V
P.S. The setting of SG300RFM has been set before shipment.
It can plug and play without any setting. (Other settings
please refer to Programming menu.)
Light
1 Blink and 1 beep
2 Blink and 2 beeps
Green
4 Blink 2 times and 4
beeps 2 times
Continuous on
Red
Off
Light
1 Successful
Green
Transmission Follow
with 1 Blink
Red
Continuous on
1 Failed
Yellow
Transmission Follow
with 1 Blink
SIGNAL
SIGNAL
9
STATUS
Good Read
Good Read
But Transmit Fail
Battery Need To Charge
In Charging
Charging Finished
STATUS
Good Transmission
Power on
Failed Transmission