Specifications - Sansui DR201V User Manual

9. Specifications

Signal to Noise Ratio
-
Total Harmonic Distortion (THD)
-
- Frequency Range
- Analog Outputs
Digital Outputs
-
Control Interface
-
- RF Input
Power Supply
-
Power Consumption
-
Dimensions
-
Weight
-
Output Level
-
- S/N Ratio (A)
Power Supply
-
Max Power Consumption
-
NOTE:
Specifications and design are subject to possible modifications without notice
DAB @2Vp-p, with instrumental 20k LPF enabled. >85dB (A)
FM Ultimate signal to noise ratio 98MHz @60dBuV/75KHz Dev. Fmod=1KHz,
Amplitude=1.3Vpp Mono >75dB
DAB @2Vp-p with instrumental 20K LPF enabled <0.1%
FM 98MHz@60dBuV/75KHz Dev. Mono Fmod=1KHz, Amplitude=1.3Vpp
<0.5%
DAB BAND 3: 5A 174.928MHz - 13F 239.200MHz
FM 87.5MHz - 108MHz
RCA/phono stereo left & right x 1
COAXIAL x 1,Optical TOSLINK x 1
RS232
F Type connector (screw thread)(to VHF/FM diplexer) 50 ohms
AC 230V, 50/60 Hz
Max 20W
(W x H x D) : 430 x 80 x 283 mm
Net 3.8kg Gross 5kg
1.1V +/- 2dB @ 1KHz 0dB
>80dB
AC 230V ~ 50Hz
20Watts
Page | 17
© Sansui UK 2012 DR201V IB Ver 1.0 Rev 0.0