Advertisement
GENERAL GUIDE
1 1 1 1 1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
3 3 3 3 3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
4 4 4 4 4 SOUND Selector
Use this selector to select the alarm volume.
5 5 5 5 5 DEMO button
Press this button to test the alarm sound.
6 6 6 6 6
°
C/
°
F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
7 7 7 7 7 SET button
Use this button when setting the current time.
8 8 8 8 8 RESET button
Press this button to reset the clock after replacing its batteries.
Operation Guide DQ-745S
USING THE CLOCK
1. Press the SET button (7) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
Contrast Setting Screen
Year Setting Screen
Month and Day
Setting Screen
2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.
–
Press
to
decrease
the flashing
digits.
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with
the date setting.
• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and
24-hour timekeeping.
• You can set the contrast level in the range of 1 to 10.
3. After making the settings you want, use the SET button (7) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
12-hour/24-hour
Setting Screen
Time Setting Screen
+
Press
to
increase
the flashing
digits.
2
Advertisement
