Activating The Memory Feature; Deactivating The Memory Feature; Replacing The Battery - Ford Edge 2008 Owner's Manual

Locks and Security

Activating the memory feature

To activate this feature:
1. Position the seat and mirrors to the desired positions.
2. Press the SET control on the
driver's door panel.
3. Within 5 five seconds, press the
lock or unlock control on the
Integrated keyhead Transmitter and
then press the 1 or 2 control on the
driver's door panel which you would
like to associate with the seat and
Driver 1 or Driver 2 positions.
4. Repeat this procedure for another
Integrated Keyhead Transmitter if desired.

Deactivating the memory feature

To deactivate this feature:
1. Press the SET control on the driver's door panel.
2. Within five seconds, press the lock or unlock control on the Integrated
Keyhead Transmitter which you would like to deactivate and then press
the SET control on the driver's door panel again.
3. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.

Replacing the battery

The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.
To replace the battery:
1. Twist a thin coin in the slot of the
IKT near the key ring in order to
remove the battery cover.
136
2008 Edge (edg)
Owners Guide (post-2002-fmt)
USA (fus)