Chapter 1 Configuring Basic Connectivity; Using The Setup Manual; Logging In To Your Wireless Router - NETGEAR WGR614v11 User Manual

N150 Wireless Router WGR614v11 User Manual

Using the Setup Manual

For first-time installation of your wireless router, refer to the NETGEAR Wireless Router
Setup Manual. The Setup Manual explains how to launch the NETGEAR Smart Wizard on
the Resource CD to step you through the procedure to connect your router, modem, and
computers. The Smart Wizard will assist you in configuring your wireless settings and
enabling wireless security for your network. After initial configuration using the Setup Manual,
you can use the information in this User Manual to configure additional features of your
wireless router.
For installation instructions in a language other than English, refer to the language options on
the Resource CD.

Logging In To Your Wireless Router

When the wireless router is connected to your network, you can access and configure the
router using your browser. The Default Access login information is printed on the bottom label
of your router.
To access the router:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field
of your browser, and then press Enter. A login window displays
Figure 1.
Tip: You can connect to the wireless router by typing either of these URLs in
the address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for example,
http://192.168.1.1.
2. Enter admin for the router user name and your password (or the default, password).
Chapter 1. Configuring Basic Connectivity | 7