Adding A Custom Service; Editing Or Deleting A Port Forwarding Entry - NETGEAR WGR614v11 User Manual

2. From the Service Name list, select the service or game that you will host on your network.
If the service does not appear in the list, see the following section,
."
3. In the corresponding Server IP Address fields, enter the last digit of the IP address of your
local computer that will provide this service.
4. To the right of Server IP Address, click Add. The service appears in the list in the screen.

Adding a Custom Service

To define a service, game, or application that does not appear in the Service Name list, you
must first determine which port number or range of numbers is used by the application. You
can usually determine this information by contacting the publisher of the application or user
groups or newsgroups. When you have the port number information, follow these steps:
1. Select Port Forwarding/Port Triggering under Advanced in the main menu.
2. Click Add Service (see
Figure 2.
3. In the Service Name field, enter a descriptive name.
4. In the Service Type field, select the protocol. If you are unsure, select TCP/UDP.
5. In the Starting Port field, enter the beginning port number.
• If the application uses only a single port, enter the same port number in the Ending
Port field.
• If the application uses a range of ports, enter the ending port number of the range in
the Ending Port field.
6. In the Server IP Address field, enter the IP address of your local computer that will provide
this service.
7. Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.

Editing or Deleting a Port Forwarding Entry

To edit or delete a port forwarding entry:h
1. In the table, select the button next to the service name.
64 | Chapter 5. Fine-Tuning Your Network
N150 Wireless Router WGR614v11 User Manual
Figure 1 on page 63).The Ports–Custom Services screen displays.
Adding a Custom Service