NETGEAR ProSafe WC7520 Reference Manual page 37

Table 4. Building Name and Floors
Setting
Floors
Floor Names
Floor Dimensions
Existing Floor Map
New Floor Map
To add another floor, click the + tab next to the Floor-1 name, or whatever name you have
7.
given the first floor, and define the floors as explained in
You can add up to 6 floors in one building but will need external USB storage if you add
more than 3 floor maps.
Click Apply to save your settings.
8.
Click Back to return to the Layout Buildings screen.
9.
To edit a building:
Select the radio button in the Edit column that corresponds to the building that you want
1.
to edit.
Click Edit.
2.
To delete a building:
Select the check box that corresponds to the building that you want to delete, or select
1.
the check box at the top row of the table to delete all buildings.
Click Delete.
2.
36 | Chapter 3: RF Planning
ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Description
The floor name is an alphanumeric string up to 64 characters in length.
Enter the floor length in meters in the Length field; enter the floor width in meters in
Width field. The default measurements for both are 40 meters.
If you have imported a floor map, a very small image of the floor map is shown. Click
Preview to enlarge the map. (If you did not import a floor map, the Preview button is
not displayed.)
If you have an existing floor map, import the map into the RF planning tool by clicking
Browse and navigating to the location where you have stored the map. Follow the
directions of your browser to import the map.
Note 1. Background images must be JPEG format and cannot exceed 2048 x 2048
pixels in size. If you attempt to import a file with a larger pixel footprint, the image will
not scale to fit the image area in the floor display area.
Note 2. Images are scaled (stretched) to fit the display area. The display area aspect
ratio is determined by the floor dimensions.
Note 3. The internal flash memory of the wireless controller supports up to 3 floor
maps. If you want to define additional floors, use external USB storage (see
on page 104).
Storage
Note 4. Because background images for your floors are embedded in the XML file
that defines your building, minimize the file size of the JPEGs that you use for your
backgrounds. You can minimize the file size by selecting maximum compression
(lowest quality) in most graphics programs.
Table 4, Building Name and
Managing
Floors.