Erase The Configuration Settings; Set The Password; Password Recovery - on networks N300RE User Manual

Erase the Configuration Settings

You can erase the current configuration settings for the extender and restore its factory
settings (see Factory Settings

To erase the current configuration and return to factory settings:
1. Select Maintenance > Backup Settings.
2. Click the Erase button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting.

Set the Password

The user name to access the extender is admin, and its default password is admin. On
Networks strongly recommends that you set a more secure password.

To set the password:
1. Select Maintenance > Set Password.
2. Type the old password, type the new password twice, and then click Apply.

Password Recovery

On Networks recommends that you enable password recovery if you change the password
for the router user name admin. Then you can recover the password if it is forgotten. This
recovery process is supported in Internet Explorer, Firefox, and Chrome browsers, but not in
the Safari browser.

To set up password recovery:
1. Select Maintenance > Set Password.
2. Select the Enable Password Recovery check box.
3. Select two security questions, and provide answers to them.
4. Click Apply.
N300RE WiFi Range Extender
on page 28).
Extender Network Settings
22