Table of Contents
Advertisement
99944200553
DESCRIPTION
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See
PARTS ORDERING instructions for specific information.
1. BRUSHES - Permanently attached to drum holders and come standard with 0.5 mm (0.018 in.) diameter
nylon bristles. Optional .7 mm (0.028 in.) diameter brushes are available for fine material sweeping
application.
2. LOWER DRIVE SHAFT ASSEMBLY - Included separately in the carton and must be assembled to the
ProSweep / gear housing assembly. Contains flexible drive cable, outer shaft housing and safety decal.
3. FLEXIBLE DRIVE CABLE - Cable end fits into drive shaft coupler of Pro Attachment Series or Split
Boom models. Lubricate drive cable every 25 hours with high temperature automotive grease.
4. BRUSH GEAR HOUSING ASSEMBLY - Brushes come pre-assembled to the gear housing in the
carton. Brushes rotate towards the operator viewed from the operators position.
X7702093405
© 08/2013 ECHO Inc.
1
Shaft Label
2
4
DESCRIPTION
3
9
Advertisement
Table of Contents
