Table of Contents
Advertisement
Using the Travel Charger
Important! Verify that the handset battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the handset
may power off and on continuously, preventing
proper operation.
Correct
1. Lift up on the plastic protector that covers the port on
the bottom of your phone and swing it open (1).
Incorrect
2. Plug the flat end of the Travel Charger into the Power/
Accessory Interface port (2) and the other end into a
standard AC wall outlet.
3. When charging is finished, remove the flat end from
the interface connector port on the phone.
Warning! Please note that a touch screen responds best to a
light touch from the pad of your finger. Using
excessive force or a metallic object when pressing
on the touch screen may damage the tempered
glass surface and void the warranty. For more
information, refer to "Standard Limited Warranty"
on page 236.
Note: Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
warning tone at regular intervals. In this condition, your
phone conserves its remaining battery power, not by turning
off the backlight, but by entering the dimming mode. For a
) blinks and the device sounds a
Getting Started
10
Advertisement
Table of Contents
