•
"1010 Battery pack" on page 62
•
"1020 Large bottom cover" on page 62
Removal steps of the thermal fan
Note: Your model might look slightly different from the following illustrations.
Loosen the screws
2
.
When installing: Make sure that the connector is attached firmly to the system board.
When installing: Do not press the top of the fan cover and the fan hub.
1100 Thermal pipes
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 62
•
"1020 Large bottom cover" on page 62
•
"1090 Thermal fan" on page 70
Removal steps of the thermal pipes
Note: Your model might look slightly different from the following illustrations.
.
Chapter 9
Removing or replacing a FRU
71