Advertisement
Product Features
How to Use
Basic Drying Techniques
Thank you for purchasing the Remington
®
dryer. Please carefully read the
1. Gently towel dry hair to remove excess water. Avoid rubbing hair with towel –
instructions contained in this booklet, and keep them in a safe place for future
this creates split ends and frizziness. Detangle hair with a wide-toothed comb.
reference.
2. Be sure dryer is turned off. Plug dryer into an electrical outlet.
3. Turn the dryer on and set it to a high heat/speed. Remove some of the
additional moisture, using your fingers to "comb" through hair.
4. When hair is almost dry, lower the heat/speed to the desired settings and
begin to style.
5. Divide hair into manageable sections. Begin at the nape of your neck and
brush through hair with desired attachment. Continue working your way up to
your scalp, then to the sides and the front, drying small sections at a time.
Cool Shot:
Cool Shot
The Cool Shot sets the style by blowing a cool stream of air. Press and hold cool
shot button to set style. Release button to return to warm air flow.
Heat/Speed Settings
Ionic Conditioning
For straightening & smoothing any hair type:
While dryer is turned off attach the wide or fine tooth comb. The combs glide
easily through the hair to create tangle-free, smooth styling. Repeat around your
Dual Voltage
Control Switch
head until hair is dry. To add volume and style while drying, roll hair around the
brush attachment once, rotating the brush attachment away from your head and
pulling the hair down toward the ends. Repeat around your head until hair is dry.
Wide Tooth Comb
Hair Care Tips
Styling Brush
■ Always keep the dryer pointed down the hair shaft to smooth the cuticle and
Fine Tooth Comb
create a silky, shiny style.
■ To help prevent heat damage and add shine, spritz damp hair with a heat
protection spray before blow drying.
■ To create a style with lots of body, apply volumizing mousse to towel dried
hair. Distribute it evenly from roots to ends, then blow dry as usual. Hair will
be soft, shiny, and full of volume.
Hang Loop
■ For a super smooth, salon-like blow dry, finish by running a straightening iron
over dried hair.
■ For a quick touch-up between shampoos, mist hair to dampen it, then style with dryer.
Cleaning and Maintenance
Operating Instructions
VOLTAGE SELECTION:
Maintenance Instructions
The travel dryer is perfect for home or travel abroad. The dryer converts easily to foreign
The dryer needs minimum maintenance to ensure the best performance and long life.
voltages so it can accompany you anywhere.
■ Do not attempt to repair the appliance yourself.
In North America
■ Keep all intake openings clear of dust accumulation. See "Cleaning Instructions"
below. No other maintenance or lubrication is required.
Your dryer is pre-set to run on North American voltage (125 volts), so no voltage adjust-
ment is necessary before using it in Canada, Mexico, or the United States.
■ If the cord becomes twisted due to use, periodically straighten it. Store appliance
and cord where they will not be damaged. Do not wrap cord around dryer.
Outside North America
Many foreign countries operate on 220/240 voltage. If you plan to travel to a country that
Cleaning Instructions
uses 220/240 volts, you will need to set the dryer's voltage selector to 250 volts before
The air filter should be cleaned regularly, since a dirty or clogged filter will impair
you can use it there. Simply insert a dime into the slot on the dryer's dual voltage selec-
the efficiency of the dryer.
tor. Then turn it so that the indicator lines up with the desired voltage. The 250 volt setting
1. To clean air filter, make sure dryer is turned off and unplugged.
can be used in any country that operates at a voltage greater than 125 volts.
2. Use a soft bristle brush to gently remove any particles that are lodged in filter.
3. If the unit is dirty, wipe it with a damp cloth.
Storage
When not in use, unplug the unit. Allow it to cool, and store out of reach of chil-
250
dren in a safe, dry location. Never wrap the cord around the appliance, as this
will cause the cord to wear prematurely and break. Handle cord carefully, and
avoid jerking, twisting, or straining it, especially at plug connections.
Warranty
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
125
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. Some states do not allow the exclusion or limita-
tion of incidental, special, or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund,return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the U.S.
125/250 VAC 60/50 Hz
Questions or comments: Call 800-736-4648 in the U.S or visit
www.RemingtonProducts.com
® Registered Trademark of Spectrum Brands, Inc., or one of its subsidiaries.
©2010 SBI Rev. 04/10 Job# CS39631
Spectrum Brands, Inc., Madison, WI 53711
Manufactured to Remington's specifications in the PRC.
T22-29617
Advertisement
