Keyboard - HP Compaq 320 Maintenance And Service Manual

Keyboard

Description
Keyboards for use in computers with 39.6-cm (15.6-in) displays
Keyboards for use in computers with 35.6-cm (14.3-in) and 33.8-cm (13.3-in)
displays
NOTE: For a detailed list of available keyboards, see
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the palm rest (see
Remove the keyboard on 39.6-cm (15.6-in) computers:
1. Position the computer upside down with the rear toward you.
2. Remove the three Phillips PM2.5×3.0 broadhead black screws (1) and three Torx M2.5×6.0
screws (2) that secure the keyboard.
78 Chapter 4 Removal and replacement procedures
Sequential part number listing on page
Battery on page 56).
Service door on page
Palm rest on page 73).
40.
56).
Spare part number
605813-xx1
605814-xx1