10.
Remove the keyboard (see
11.
Remove the top cover (see
12.
Remove the system board
Remove the modem module:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the system
board.
3.
Lift the modem module (2) straight up from the system board.
4.
With the modem raised, disconnect the RJ-11 cable (1) from beneath the modem.
5.
Remove the tape (2) that secures the cable to the system board and then, remove the cable (3).
110
Chapter 4 Removal and replacement procedures
Keyboard on page
78).
Top cover on page
82).
(seeSystem board on page
102).