Troubleshooting - Margaritaville DM 1000 User Manual

troubleshooting

if the Power indicator light does not light:
Check that the unit is plugged into a working power outlet.
if liquid leaks from the base of the glass blending Jar:
Remove it from the unit and check that the Blending Blade Sealing Ring is
properly installed and that the Blending Jar Base is tightened.
if water leaks from the unit: Empty the Ice Melt Reservoir.
if the glass blending Jar overflows during the shave 'n blend™ cycle:
Check that the liquid level is not above the three glass icons on the Glass
Bending Jar.
if the glass blending Jar will not sit on the blending base:
Remove it from the unit and check for ice on the Blending Base.
WARNING: unplug the unit before removing ice from the Blending Base.
if the shaver does not shave sufficient ice for the liquid in the
glass blending Jar:
Check that the Number of Drinks Rotary Switch setting corresponds to the
amount of liquid in the Blending Jar.
dos and don'ts
do not Place fingers into the Glass Blending Jar or Ice Hopper. The blades in
this unit are sharp and could cause injury.
do not place Glass Blending Jar onto Blending Base while motor is running.
The spinning Blending Base could damage the Glass Blending Jar.
do not twist Glass Blending Jar when removing. Simply lift and remove.
Twisting the Glass Blending Jar could loosen the Blending Jar Base causing it
to leak.
do not put hot liquid into the Glass Blending Jar. Hot liquids could be ejected
during the blending process causing injury.
do not place ice, frozen foods or very cold liquids into a Blending Jar which
has come directly from a hot dishwasher. The sudden change in temperature
could cause the Blending Jar to crack.
do not place very hot liquids or foods into a Blending Jar that has come
directly from the freezer. The sudden change in temperature could cause the
Blending Jar to crack.
do Follow the Cleaning and Maintenance instructions prior to your first use.
do unplug the unit when not in use.
-10-