Table of Contents
Advertisement
System Toolbox
System History
The Control Panel keeps a log of system events in the order which they occur. Each event is marked
with the date and time the event occurred.
To make reading the log easier, the system history display can be "fi ltered" to show selected events
only. The events that can be fi ltered for the system history log display are:
•
Arm or Disarm of the system
•
Bypasses of sensors (force bypasses and manual bypasses)
•
Alarms (alarms are displayed with a red stripe)
•
Alerts (alerts are displayed with a yellow stripe)
Some system events always display regardless
of the fi lters selected. These events include:
•
Walk test started or terminated.
•
Programming mode started or terminated.
To view the system history log, use the
following steps:
1.
On the Home Screen, press
2.
On the Security Screen, press
3.
On the Menu Screen, press
4.
On the Toolbox Screen (1 of 3),
press SYSTEM HISTORY.
5.
The log of system events will
be displayed. Use the ↑ and ↓
arrows to scroll through the log.
6.
To choose what's displayed,
press FILTERS.
7.
Select the events to display with the
check boxes. Press ALL to select all the
check boxes, or NONE to clear all the
check boxes. Press OK when fi nished.
8.
View the system history. Press
BACK when fi nished.
30
SECURITY.
MENU.
TOOLBOX.
System History Screen
System History Filters
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless Security System and is the answer not in the manual?
Questions and answers