It enables us to keep you posted on our latest advancements, and helps us to better understand our customers and build products that meet their needs and expectations. PARTS INCLUDED Cat. No. AEN24 One pair of speakers with grilles. Bracket Assembly 1 – Metal Nut (2) 2 –...
(refer to Placement Figure 1B below). NOTE: While the Cat. No. AEN24 is weather-resistant, it is not designed to be immersed in water. Be selective in your outdoor placement. Placing these speakers under roof eaves or a patio awning will offer some shelter and help contribute to years of trouble-free performance.
SPEAKER CONNECTIONS Speakers and electronics terminals have corresponding (+) and (–) terminals. It is important to connect both speakers identically: (+) on the speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier. Wiring “out of phase” results in thin sound, weak bass and a poor stereo image.
ELECTRICAL INSPECTOR FOR CORRECT WIRE RATINGS. WALL MOUNTING The Cat. No. AEN24 loudspeaker is to be wall-mounted with the adjustable wall-mounting brackets included, or placed on a shelf. This product is not intended for ceiling mounting. Note that is the...
Page 6
1. Loosen and remove the molded nut (2) by turning it counter clock- wise. Use the supplied metal bar (5) if necessary by inserting it in one of the holes on the molded nut (2). 2. Pull the ball/shaft (3) out of the wall bracket (4). 3.
TROUBLESHOOTING IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS: • Check that receiver/amplifier is on and a source is playing. • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching each other.
We do not recommend sustained operation at these maximum power levels. • * Trademark of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. AEN24 Description Low-Frequency Transducer 2-Way 4" bookshelf, 4.0"...
Page 9
This page is NOT to be printed in the booklet 11.0" LEVITON INSTRUCTION SHEET/MANUAL 8.5" SPECIFICATIONS DI-000-AEN24-02A Black Helvetica OVERALL SIZE 50 lb. offset Paper size: 5.5" 11" x 8.5" (Printer Spread) 8 Pages Overall size: 5.5" x 8.5" (booklet - saddle stitch)