Charging The Keyboard; Syncing The Bluetooth To Your Device - Brookstone Executive Bluetooth Keyboard Set User Manual

charging The Keyboard

Important: Fully charge the Bluetooth Keyboard before first use.
1 . Plug the USB Charging Cable (included) into the charging port on the
keyboard and into a USB outlet .
2 . The Charging LED will illuminate red during charging, and shut off when
charging is complete .
3 . The keyboard takes approximately 3 hours to charge for up to 140
hours of use .
Note: The Power LED indicator will flash orange when your Bluetooth
Keyboard's battery needs recharging.
syncing wiTh blueTooTh
1 . Power on your Bluetooth enabled device .
2 . Slide the On/Off switch on the Bluetooth Keyboard to "on" .
The power LED will light up for a few seconds and then shut off .
3 . Press the Connect button on the Bluetooth Keyboard . The Power LED
will blink .
4 . Select the "Settings" icon on your device's screen .
5 . Locate and select "Bluetooth" in your device's "General" menu .
6 . Under "Devices" on your device, select the Bluetooth Keyboard .
7 . Your device will now prompt you to enter the Bluetooth password shown on screen
and then to press the Enter key using the Bluetooth Keyboard .
5