American standard renaissance el total toilet installation instructions (5 pages)
Summary of Contents for American Standard Enfield Console Table 7460.100
Page 1
ASSEMBLY & INSTALLATION INSTRUCTIONS Enfield Console Table 7460.100 With Raised Wood Panels 7460.200 With Cast Grilles CONSOLE TABLE VANITY TOP-GRANITE 7460.100 6860.725 Bakersfield White or 6860.722 Autumn Spray 7460.200 Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
Page 2
CONSOLE TABLE INSTALLATION Identify desired location of the console table. Provide suitable reinforcement required for anchoring the vanity to the wall. Centerline of reinforcement should be 30" up from the floor (see Figure 1). Rough in supply lines and waste per rough in dimensions. Drill at least two 3/8"...
Page 3
Mount the drain assembly to the sink. Be certain to apply a bead of sealing putty on the underside of the drain (area "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty. After installing the sink, connect the trap to the drain assembly and hand tighten to check alignment.
Page 4
This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or province to province, in which case this warranty does not affect such statutory rights. In the United States: American Standard Inc. P.O. Box 6820 Piscataway, New Jersey 08855...