Camera And Camcorder Settings - Samsung SGH-I257M User Manual

Camera and Camcorder Settings

This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, tap
Settings)
.
2. The follow settings are located under the Camera,
Camcorder and General tabs. The settings that are
displayed will depend on what camera mode you
are in.
• Camera:
–
Photo size: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
–
Face detection: This option places the focus on any faces
that are detected when you take a photo.
–
Metering: Select the area of the image where exposure is
measured (Centre-weighted, Matrix or Spot).
82
(Camera
➔
–
ISO: determines how sensitive the light meter is on your digital
camera. Choose from Auto, 100, 200, 400, or 800. Use a
lower ISO number to make your camera less sensitive to light,
a higher ISO number to take photos with less light, or Auto to
let the camera automatically adjust the ISO for each of your
shots.
–
Anti shake: Compensates for camera movement.
–
Save as: allows you to assign rich tone usage to an image.
• Camcorder:
–
Video size: Select a resolution for videos. Use higher
resolution for higher quality. Higher resolution videos take up
more memory.
• Settings:
–
GPS tag: Attach a GPS location tag to the photo. To improve
GPS signals, avoid shooting in locations where the signal may
be obstructed, such as between buildings or in low-lying areas,
or in poor weather conditions. Your location may appear on
your photos when you upload them to the Internet. To avoid
this, deactivate the GPS tag setting.
–
Review: Set this option if you want to view each picture after
you take it. Select a time value.