Table of Contents
Advertisement
Matrox
PIRANHA
Server (NIC)
Stright-through wire
PC Workstation
D
Troubleshooting
This section describes typical problems you may encounter during installation or
configuration, and provides suggested solutions for those problems.
P
:
ROBLEM
Throughput between a device and the Piranha Switch very slow and/or
erratic.
Workstation connection to the server (via Piranha Switch) slow and/or
erratic.
S
:
OLUTION
One or more ports of the Piranha Switch are incorrectly configured for half
or full-duplex operation. Refer to the instructions contained in section B to
determine whether ports should be configured for half or full-duplex mode,
to match the configuration of the devices to which they are connected.
P
:
ROBLEM
No communication between a device and the Piranha Switch.
S
#1:
OLUTION
Examine the status light for the port:
Matrox Piranha
Switch 8
10 BaseT Ethernet Switch
MDI-X
1
2
3
4
5
6
Full-Duplex
Straight-through
wire
Half-Duplex,
Stright-through wire
Full-Duplex,
PC Workstation
7
8
Full Duplex, Cross-over Wire
10 BaseT Ethernet Switch
MDI-X
Matrox
PIRANHA
1
2
3
4
5
Another 10BaseT Switch
(MDI-X Port)
Half-Duplex, Stright-through wire
10BaseT Repeater Hub (MDI Uplink Port
6
7
8
Advertisement
Table of Contents
