HP Compaq 8100 Elite Series Quickspecs page 7

QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
Intel Core i5-680 Processor
3.60 GHz, 4M total cache
2 cores/4 threads
Integrated Intel® HD Graphics
Intel® Core™ processor with vPro™ technology
Intel® Stable Image Platform Program (SIPP)
Intel Core i5-750 Processor
2.66 GHz, 8M total cache
4 cores/4 threads
Requires a discrete graphics solution
Intel Core i5-760 Processor
2.80 GHz, 8M total cache
4 cores/4 threads
Requires a discrete graphics solution
Intel Core i7 Processors: Intel Core i7 Processors: Intel Core i7 Processors: Intel Core i7 Processors:
Intel Core i7-860 Processor
2.80 GHz, 8M total cache
4 cores/8 threads
Requires a discrete graphics solution
Intel® Core™ processor with vPro™ technology
Intel® Stable Image Platform Program (SIPP)
Intel Core i7-870 Processor
2.93 GHz, 8M total cache
4 cores/8 threads
Requires a discrete graphics solution
Intel® Core™ processor with vPro™ technology
Intel® Stable Image Platform Program (SIPP)
Intel Core i7-880 Processor
3.06 GHz, 8M total cache
4 cores/8 threads
Requires a discrete graphics solution
Intel® Core™ processor with vPro™ technology
Redundant Array of Independent Drives (RAID) Redundant Array of Independent Drives (RAID) Redundant Array of Independent Drives (RAID) Redundant Array of Independent Drives (RAID)
Flexible implementation:
DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup. Locked drives
will be displayed as such in the RAID option ROM interface.
Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not appear in
Drive Configuration when switching to RAID mode.
DPS Self Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE: NOTE: NOTE: NOTE: RAID 1 is the only RAID configuration offered via factory configurations. The pre-configured systems:
Are only available on the CMT and SFF form factors. The USDT does not support RAID as it does not allow for more than one
hard disk drive.
Are complete RAID systems and have both drives installed. If the CMT is configured with three hard disk drives, the third drive
is would be unpartitioned and not part of the RAID array
DA - 13524 North America — Version 26 — September 30, 2011
HP Compaq 8100 Elite Series HP Compaq 8100 Elite Series HP Compaq 8100 Elite Series HP Compaq 8100 Elite Series
Page 7