Specifications - Niles SWA-500M Installation Manual

SPECIFICATIONS

Continuous Output Power
<1% THD +N into 4 ohms: 500 watts
S/N ratio > 90dB
Volume Max and Input Shield Grounded
<2.0 mV
Variable Low Pass Filter
12 dB per octave -3dB @ 40Hz minimum
position -3dB @ 120Hz maximum position
Fixed Low Pass Filter
6dB per octave -3dB @ 125Hz
Variable High Pass Filter
12 dB per octave selectable switch
Auto Turn on sensitivity 3.0mV 50 Hz input
Input Sensitivity Rated Power
250 mV of input
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
High Level Input Sensitivity Rate Power
>3 volts of input
Delay off time
15-20 minutes
Power requirements
120/230 switchable internal
AC Cord IEC Removable
Two prong
High Pot Test
2kV@2mA, 60Hz, 2 sec.
Variable Line Level Output High Pass
12dB/Octave
• 3dB @ 60Hz – Knob full counter clockwise
• 3dB @160Hz – Knob full clockwise
19