Gigabyte GA-Z77-HD3 User Manual page 41

` 3D Power Control
& PWM Phase Control
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance),
Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Vcore Voltage Response
Allows you to configure the response time for Vcore changes using preset levels.
Auto Lets BIOS automatically configure this setting. (Default)
Selects Standard or Fast which represents different levels of the response time
Standard~Fast
for Vcore changes.
& Vcore Loadline Calibration
Allows you to set the Load-Line Calibration level for the Vcore. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. Auto lets the BIOS automatically configure this setting and sets
the voltage following Intel's specifications. (Default: Auto)
& GFX Voltage Loadline Calibration
Allows you to set the Load-Line Calibration level for the GFX voltage. The levels are (from highest to lowest):
High, Medium, Low, and Standard. Selecting a higher level keeps the GFX voltage more consistent with
what is set in BIOS under heavy load. Auto lets the BIOS automatically configure this setting and sets the
voltage following Intel's specifications. (Default: Auto)
- 41 - BIOS Setup