Warpia SWP100A User Manual page 25

5.3.2.3 Adjusting Screen Resolution
Resolution
Use the slider to adjust the desired resolution of the display (see circle #2 in
Figure 14).
5.3.2.4 Adjusting Color Level
Colors
Use the drop-down box to select a color complexity level (see circle #2 in Figure 14).
5.3.2.5 Setting the A/V Adapter as the Primary Display
To make the A/V Adapter display the primary display:
1. Select the screen that is connected to the A/V Adapter - for example "
DisplayLink Graphics Adapter
Extend the desktop onto this monitor.
2. Check the option
(In Windows XP -
This is my main monitor.
3. Check the option
(in Windows XP -
OK
4. Click to save the new settings.
Note: On some PCs it is necessary to disable the main display (uncheck the box marked
'Extend the desktop onto this monitor' for the main display) as part of the same
settings change.
The A/V Adapter remains the primary one if the PC enters Hibernate or Suspend
mode or is rebooted. If the A/V Adapter is detached, the main display becomes the
primary display again.
" as shown in the screen above.
Extend my Windows desktop onto this monitor
Use this device as the primary monitor
Wireless USB A/V Adapter Set User Guide
Default Monitor on
).
).
Page 25