Attaching/Detaching The Stand And Wall Mounting - Technika LED47-E271 User Manual

ATTACHING/DETACHING THE STAND
Detaching the Stand
Remove the 5 screws highlighted then remove the stand neck and base from the rear of the
TV set.
2
Wall mounting the TV
IMPORTANT - Before drilling any holes in the wall ensure you are not
drilling where there could be any electric wires, water or gas pipes.
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV's screen is 'face on'.
See fi g 1 and 2
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
10
Attaching / detaching the stand and wall mounting
5 x M(4x12)
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting
holes on the rear of the TV. These holes are indicated in the
picture below.
fi g 1
INCORRECT
CORRECT
fi g 2
Viewing angle
TV
Viewing angle
TV