Optimizing Digital Conversion - HP 2310t User Manual

Table 4-3 OSD Menu (continued)
Icon

Optimizing Digital Conversion

Two controls in the on-screen display can be adjusted to improve image performance: Clock and
Clock Phase.
NOTE: The Clock and Clock Phase controls are adjustable only when using an analog input. These
controls are not adjustable for digital inputs.
The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock
setting. Use these controls only when the auto-adjustment function does not provide a satisfactory
image.
●
Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the
screen background.
●
Clock Phase—Increases/decreases the value to minimize video distortion or video jitter.
NOTE: When using the controls, you will obtain the best results by using the auto-adjustment
pattern software utility provided on the CD.
When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue
adjusting the values until the distortion disappears. To restore the factory settings, select Yes from
the Factory Reset menu in the on-screen display.
26 Chapter 4 Operating the Monitor
Main Menu Submenu
Auto-Switch Source
Exit
Description
Turns the system's automatic video signal input to
On or Off. The factory default is On.
Exits the OSD menu screen.
ENWW