Routing the Cables
Before connecting the cables, route them through the cable routing hole in the center of the stand.
Figure 3-3
Connecting the Cables
CAUTION:
powered off.
Connecting the VGA (Analog) Video Cable (HP 2310ti Model Only)
For analog operation, connect one end of a VGA signal cable (sold separately) to the VGA connector
on the rear of the monitor and the other end to the VGA connector on the computer.
Figure 3-4
6
Chapter 3 Setting Up the Monitor
Routing Cables
Before connecting cables to the monitor, ensure that the computer and the monitor are
Connecting the VGA Cable
ENWW