ANGLED SERIES CONSOLES (AS SERIES)
Part Number
C-CUP2-E-AS
C-AS-MMP
C-AS-MMP-CV
C-AS-MMP-IMP
Ph: 800.524.9900 or 215.957.0720
E-mail: sales@havis.com
CUP HOLDERS
Dual External Cup Holder 25° Bend AS Series
•
Mounts externally flush to the rear of all 25º AS Series console
•
4" Long x 8.625" Wide x 3" Deep
•
Accepts cups up to 3.375" dia.
•
Replaces multiple cup holders, including the C-CHNY-2
MONITOR MOUNTS & WIRE COVER PANELS
Monitor Mounting Platform For 25° Angled Series Console
•
Horizontal top mounting surface for adding a monitor
•
Includes hardware for mounting to existing holes in top end of AS
Series console
•
16 gauge formed steel
•
Order monitor mount separately (see pgs C63-68)
•
Weight distributing bottom plate for added strength
Monitor Mounting Platform & Wiring Cover Panel (Pair) for Crown Vic
•
Contoured wiring panels for 1995-2008 Ford Crown Vic
•
Horizontal top mounting surface for adding a monitor
•
Includes hardware for mounting to existing holes in top end of AS Series
console
•
16 gauge formed steel
•
Order monitor mount separately (see pgs C63-68)
•
Weight distributing bottom plate for added strength
Monitor Mounting Platform & Wiring Cover Panel (Pair) for Impala
•
Contoured wiring panels for 2000-2005 Chevrolet Impala
•
Horizontal top mounting surface for adding a monitor
•
Includes hardware for mounting to existing holes in top end of AS
Series console
•
16 gauge formed steel
•
Order monitor mount separately (see pgs C63-68)
•
Weight distributing bottom plate for added strength
Contact us at:
By: Havis-Shields
Fax: 215.957.0729
Web: www.havis.com
Weight
3 lbs.
3 lbs.
3 lbs.
3 lbs.
C9