Advertisement
By: Havis-Shields
Part Number
C-3330-800
C-VS-800-CV
C-3329-800-1
C-3610-CV
Ph: 800.524.9900 or 215.957.0720
C64
E-mail: sales@havis.com
MW-800 FIXED MONITOR SECTION
FOR 1996-2008 CROWN VIC (CV)
FIXED MONITOR MOUNT
•
MW-800 dash monitor mount for 96-08 CV
•
Mounts to dash using "J" clamps & existing hardware holes
•
Contoured trim fascia includes cutouts for relocating rear defrost &
trunk release buttons
•
2-piece design allows easy removal of monitor
•
Requires temporary removal of a 22" piece of dash trim and no other
modifications
8" Under Dash Console For 1995-2008 Ford Crown Victoria
•
Uses existing side tray brakcets from ashtray
•
Includes filler plates (FP) and/or equipment brackets (EB) to
completely enclose mounting area less internal mount options
•
Used to mount remote type control heads (limited depth)
•
Must be ordered separately: HVAC control relocation bracket (P/N C-
EB40-ACV-1P), AM/FM relocation bracket (P/N C-EB40-RCV-1P)
•
Relocates lighter plug and trunk release to the side
•
No vehicle mounting kit required
•
See console appendix (page C82) for mounting depth allowed for
control heads and/or options.
KEYBOARD MOUNT FOR MW-800
•
Fits Motorola MW-800 keyboard
•
Mounts to end of most manufacturer's consoles with plate or adjustable TCB telescoping
computer base
•
Spring loaded release designed for one-handed removal
•
Use with tilt/swivel adapter bracket C-3085-UN-1 or tilt/swivel C-3075-3
PENTAX PRINTER GLOVE BOX MOUNT
•
Printer housing for 96-08 Crown Vic
•
Glove box mount for all Pentax 2" roll-feed Pocketjet II and III
series mobile printers
•
Slides out when glove box door opens for easy access to
paper roll
•
Kit includes door replacement plate & door strap lanyard for
extra strength
•
May not be combined with C-3549-800
•
Additional printer mounts can be found on pg C69
Contact us at:
MOTOROLA MOUNTING SYSTEMS
Fax: 215.957.0729
Web: www.havis.com
Weight
3 lbs.
4 lbs.
3 lbs.
5 lbs.
Advertisement
